TecniFUE 8 GEN Punch
Our belief in the conviction that a hair transplant is tailor-made and our 360-degree approach to constant improvement for all facets of a hair transplant has resulted in the development of the TecniFUE 8 GEN Punch. The hair transplant phase in which grafts are extracted from the donor area is accomplished by a micro motor-driven device. The device that is compared by many to a laser pointer has a hollow point which is a separate unit.
This tip is set in circulating motion by the micromotor, whereby the grafts are loosened by light contact with the skin for easy removal from the donor area. This point is referred to in technical terms as a punch. This punch has a diameter of 0.6 – 0.9 mm and the use of correct diameter is determined based on the skin and graft structure. A punch is a standard product in which the same type of punch is used for each individual.
However, we as TecniFUE International have managed to realize a number of improvements with a Manufacturer of Punches, which has resulted in 8 different types of Punches with a diameter of 0.6 – 0.9 mm. Thanks to the different types of Punches, the most ideal Punch can be used for every skin and graft type. Our Punches offer two major advantages over the standard Punches used by other clinics. By using the right Punch for a certain skin type, the skin tissue is less damaged, so that the donor zone heals faster.
The second advantage of an individualized punch is that it allows the specialist to extract multiple grafts with 2, 3 or 4 hairs. A graft can consist of 1 or more hairs. If the Punch is a standard Punch, there is a greater risk of extracting fewer grafts consisting of multiple hairs. A hair transplant in which a high number of grafts with multiple hairs are implanted results in a more natural result with a higher hair density. Thanks to the TecniFUE 8 Gen Punches it is now possible to use a suitable Punch for each patient and to extract and implant the maximum number of multi-hair grafts.